Distillation Labware
Glassware and replacement parts designed to carry out distillations in laboratory settings; includes condensers, distillation heads, receivers, etc. Products are available for various scales and for specialty distillations.
Distillation is a process used widely in the laboratory or in wider working environments for separating or purifying liquids or liquid mixtures based on the different boiling points of individual components.
Distillation Applications:
• Separation and purification of miscible liquid mixtures in organic chemistry
• Drying of solid residues and/or solvent removal
• Fractional distillation of liquids from polymers and petroleum products
• Removal of particulates or other solid contaminants
• As part of a water purification system for production of distilled water for laboratory use
• Specialist steam distillation-based applications such as Kjeldahl analysis of nitrogen and proteins in food, beverage, or environmental samples
What Types of Distillation Equipment Are Available?
Conventional distillation apparatus, typically comprising individual, jointed borosilicate glassware components assembled by the user (depending upon the application), using appropriate clamps, stands, and supports. Most conventional distillation assemblies combine a round-bottomed distilling flask to contain and heat the liquid(s) that require purification, fitted with a stoppered or jointed neck to which is attached a downward-sloping, inclined side-arm for connection to a condensing unit to cool the heated vapors back down to their liquid state. Heating mantles are the preferred heat source for improved temperature control. These conventional distillation units are also available supplied complete and ready-assembled for added convenience and ease of use.
Specialized automated distillation equipment, notably units designed for the determination of volatile acidity and alcoholic strength by volume in wines, musts, and alcoholic beverages, and units designed for Kjeldahl nitrogen or protein determinations.
MSC Value Collection Side Release Snatch Block, 4,400 Lbs. Load Limit, 3 in. Outside Dia., Steel
This side release snatch block is designed for heavy-duty applications, featuring a durable steel construction and a painted finish. It has a 4,400 lbs. load limit and a single sheave, making it suitable for use with wire ropes of various diameters.
- 4,400 lbs. load limit
- Side release design
- Single sheave for efficient operation
- 3 in. outside diameter
- Compatible with 5/16 in. and 3/8 in. wire ropes
- Durable steel material
- Painted finish for corrosion resistance
Ace Glass, Inc. 10mm 69cm solid glass stir shaft, polished, bead type
10mm O.D. polished glass stirring shaft; bead type. Length: 69cm. Use with only ACE PTFE stirrer bearings. Shafts accept 316 SS multi-paddle or turbine agitators secured with set-screw on ground flat section.
Ace Glass, Inc. Tube, distillation, connecting, 24/40 standard taper joints, 0-4 Hi-Vac valve, 125mm center length between joints, No-Air Schlenk
Tube, distillation, connecting, 24/40 standard taper joints, 0-4 Hi-Vac valve, 125mm center length between joints, No-Air Schlenk
Ace Glass, Inc. Receiver, moisture test, 10mL, 35/20
10mL moisture test receiver with 35/20 spherical joint. Suitable for ASTM D 95 and E 123. Subdivided 0.1mL to 2.0mL, and 0.2mL above 2.0mL.
Ace Glass, Inc. HEAD ONLY HEAD ONLY
Head only with 14/20 joint, used with distillation head with finger type condenser.
Ace Glass, Inc. Distributor, distilling, 14/20 PTFE clad joints
Distilling distributor with 14/20 standard taper PTFE-clad joints.
DC Scientific Glass Inc CYLINDER D86 RESIDUE 5ML
This item has a minimum qty of 3 per supplier requirements.
CYLINDER D86 RESIDUE 5ML
Chemglass Life Sciences Sublimation Apparatus, 15mL, Complete
Sublimation Apparatus, 15mL, Complete. Two-piece sublimer consisting of an upper water cooled condenser and lower flat bottom flask. Sublimate is collected on the inner wall of the condenser. The two components are assembled by a grease-free o-ring seal which permits the components to be gently separated for maximum product recovery. When condenser is inverted, the top vacuum connection serves as a funnel for convenient product removal. Complete apparatus consists of a condenser, flask, Viton o-ring and CG-150 stainless steel clamp. Available in two listed sizes.